Hard-to-reach lubrication points, limited installation space, and low lubricant requirements. These conditions can pose significant challenges for machinery maintenance, especially when regular manual relubrication is difficult to carry out.
But does limited space really mean giving up on automatic lubrication when a standard-sized lubricator simply won’t fit?
The simalube 15 ml automatic lubricator offers a compact solution for precisely these applications.
When Accessibility Is the Biggest Challenge
Compact drives, packaging machinery, and conveyor systems often have lubrication points that are difficult to access. Even a small rolling bearing may require regular relubrication, provided its design and the manufacturer’s specifications allow it.
In such cases, the main challenge is not necessarily the amount of lubricant required, but ensuring that it is replenished at appropriate intervals.
Manual lubrication can be time-consuming, especially when accessing the lubrication point requires removing protective covers or shutting down the machine. Insufficient or improper relubrication can lead to increased wear and premature component failure.
Automatic lubrication can reduce the need for manual intervention, provided the system is properly matched to the requirements of the specific lubrication point.
simalube 15 ml: Continuous Lubrication in Space-Constrained Applications
The simalube 15 ml is the smallest version in the simalube product range. It is primarily designed for applications where installation space is limited and lubricant requirements are low.
The device automatically and continuously dispenses lubricant. The dispensing period can be adjusted from 1 to 12 months, although the actual lubricant delivery rate also depends on operating conditions.
Its compact design and the availability of various mounting accessories can make it possible to automate lubrication points that previously required manual relubrication.
When properly selected and installed, this can reduce the need for manual relubrication and enable more predictable maintenance planning.
What Should You Consider When Choosing an Automatic Lubricator?
The 15 ml cartridge capacity alone does not mean that the device is suitable for every small bearing.
The key factors are the actual lubricant requirements of the lubrication point and the operating conditions of the application.
Before selecting a lubricator, four important questions should be considered:
- Lubricant requirements: Is relubrication necessary, and is the 15 ml capacity sufficient for the planned dispensing period?
- Lubricant compatibility: Does the selected lubricant meet the manufacturer’s specifications, and is it compatible with the lubricant already in use?
- Operating conditions: What temperatures and backpressure at the lubrication point can be expected?
- Installation: Can a suitable connection be established, ensuring that the lubricant reaches the lubrication point without obstruction?
The manufacturer specifies an ambient operating temperature range of –20 °C to +55 °C for the simalube product range.
It is important to note that setting the dispensing period between 1 and 12 months does not guarantee a constant lubricant delivery rate under all operating conditions. Temperature and resistance at the lubrication point can affect the actual lubricant output.
Therefore, the appropriate setting should be determined according to the manufacturer’s technical instructions, and the lubricator’s operation should be checked periodically.
Calculation Pro: Helping You Select the Right Lubricator Size
The simatec Calculation Pro mobile app can help determine the appropriate lubricator cartridge size and dispensing period.
The app offers two approaches: users can either rely on their previous lubrication experience or perform a theoretical calculation of lubricant requirements.
The calculation tool can be used for rolling bearings, chains, as well as radial and axial plain bearings. It helps users select a suitable cartridge size between 15 and 250 ml and a dispensing period of 1 to 12 months.
The calculation results provide a starting point for sizing the lubricator but do not replace the machine manufacturer’s lubrication specifications, verification of lubricant suitability, or consideration of actual operating conditions.
The Right Amount of Lubricant Matters
When lubricating bearings, both insufficient and excessive lubrication should be avoided. The goal is to ensure a consistent supply of the right lubricant in the correct quantity.
The simalube product range is therefore available in 15, 30, 60, 125, and 250 ml versions. The cartridge size and dispensing period should always be matched to the requirements of the specific lubrication point.
The 15 ml version can be particularly suitable for applications where low lubricant requirements and limited installation space make automatic lubrication difficult to implement.
If your machinery has hard-to-reach lubrication points, it is worth exploring whether automatic lubrication could be a suitable solution. The Bearing Kft. technical team can help you select a simatec lubrication solution that meets your application’s requirements.
Frequently Asked Questions About Automatic Lubrication
Can automatic lubrication be used in confined spaces?
Yes, provided the design and lubricant requirements of the lubrication point allow it. The simalube 15 ml automatic lubricator is specifically designed for applications with limited installation space. Before installation, the available space and connection requirements must be checked.
What applications is the simalube 15 ml suitable for?
The simalube 15 ml may be suitable for smaller rolling bearings that require relubrication, compact drives, packaging machinery, and conveyor systems. Its suitability depends on lubricant requirements, operating conditions, and installation possibilities.
How long does the simalube 15 ml dispense lubricant?
The dispensing period can be adjusted from 1 to 12 months. However, the actual lubricant delivery rate may be affected by temperature and backpressure at the lubrication point. The appropriate setting should be determined according to the manufacturer’s instructions.
How do I choose the right simalube cartridge size?
The selection should be based on the lubricant requirements of the lubrication point and the planned dispensing period. The simalube range is available in 15, 30, 60, 125, and 250 ml versions. The simatec Calculation Pro app can also help determine the appropriate size.
Can automatic lubricators be used with all bearings?
No. Automatic relubrication is only suitable for bearings whose design and manufacturer specifications allow it. Some factory-sealed, lubricated-for-life bearings do not require or permit external relubrication.
What is the simatec Calculation Pro app used for?
Calculation Pro helps estimate lubricant requirements and select the appropriate simalube cartridge size and dispensing period. The calculation results do not replace the machine manufacturer’s lubrication specifications or the need to assess actual operating conditions.


